There are a few things that could go wrong in the kitchen, and one of them is when you start cleaning the dishes and you notice the water is not draining. So, instead of finishing washing the plates, you wait until the water is cleared.
Many of us think that kitchen clogs would go away on their own. There are indeed some instances when this seems to be the case. However, those moments are rare, and most of the time, you need to do something about the clogging before it gets worse and you are unable to use the sink, there are insects and rodents everywhere, and the smell has gone so bad.
So, how do you fix a clogged kitchen sink?
DIY or Call a Plumber
Kitchen sink blockages are among the plumbing issues we can fix on our own. But before we dive into how to fix such problems, be reminded that if anything is not working, then it is time to call a professional plumber Inner West Sydney.
The root of the problem might be too big for a DIY repair, and you’ll need the experts to come along with their vast knowledge and tools to help you unclog the sink.
Nevertheless, try out these methods first.
Ways to Fix a Clogged Kitchen Sink
There are several things you can do to fix a clogged sink. Here they are:
1. Boiling water
The first thing you’ll want to do is boil some water and then pour it down the drain, then check if the water is draining as it should.
If it does, then the cause of the problem might be accumulated grease and oil that you might have dumped into your drain. They could harden and it would be easy for food waste to get trapped in them, causing the blockage. If not, you can try another half gallon of boiling water for a second time and see if it does the trick.
However, it’s important to note to never do this method if your drain is attached to PVC pipes as the heat from the boiling water could melt it.
2. Vinegar and baking soda
Vinegar and baking soda aren’t just used for cooking. You can find a few different uses for them around the house, including fixing your clogged kitchen sink.
All you got to do is remove the remaining water on your sink, then pour one cup of baking soda down your sink. You might have to push the soda down, but you can easily do that with a spatula. Once the baking soda is down the drain, pour one cup of vinegar down there as well. There will be a reaction, so put a stopper on the drain to push the mixture down.
Wait for five minutes and then rinse with warm water and see if it worked. If not, follow with a kettle of boiling water and try the mixture again.
When both of the steps fail, then you can try a plunger. Make sure there is some water on the sink, maybe ¼ to ½ full, then position the plunger on the clogged drain. If the sink has two drains, cover the one without an issue, then just use the plunger as usual.
Typically, you can find plungers made for sinks at home depots. It’s best to invest in one for these types of problems.
When All Else Fails…
Then again, if anything you do doesn’t work, it’s best to call a professional plumber in Inner West Sydney to do the job for you. They can assure that your plumbing issues are solved before it gets worse.